Web
Sling Shackle is designed to connect Synthetic Web Slings
and Synthetic Round Slings to eyebolts, pad eyes, and
lifting lugs.
Quench
& Tempered • Load-Rated
Incorporates
same ear spread and pin dimensions as conventional Crosby
Shackles. Allows easy connection to pad eyes, eye bolts,
and lifting lugs.
Increased
radius of bow gives wider sling bearing surface resulting
in an increased area for load distribution, thus:
Increasing
Synthetic Sling efficiency by at least 15% as compared
to standard anchor and chain shackle bows and conventional
eye hooks. This allows 100% of the slings rated Working
Load Limit to be achieved.
Allowing
better load distribution on internal fibers.
All Alloy Construction
Design Factor of 5 to 1.
Each shackle has a Product Identification Code (PIC) for
material traceability along with a Working Load Limit and
the name Crosby forged into it.
Look for the Red Pin® ... The mark of genuine Crosby
Quality.
S-281
Stock No.
Round
Sling
Size (No.)
Web
Slings*
Working
Load
Limit
(tons)^
Weight
Each
(lbs.)
Dimensions
(in.)
Price
Order
Now!
Webbing
Width
(in.)
Eye
Width
(in.)
Ply
A
B
C
D
E
F
G
1021048
1
& 2
2
2
2
3-1/4
1.2
1.06
2.5
.75
1.62
1.22
3.84
3.34
$14.67
1021057
3
3
1.5
2
4-1/2
1.5
1.25
2.00
.88
1.50
1.41
3.38
3.97
$20.98
1021066
4
4
2
2
6-1/4
2.5
1.44
2.50
1.00
2.00
1.62
4.22
4.50
$28.89
1021075
5
& 6
6
3
2
8-1/2
4.3
1.69
3.62
1.13
2.75
1.84
5.64
5.13
$39.06
*Designed
for use with Type III, (Eye & Eye), Class 7, 2 Ply web
slings. † NOTE: Maximum Proof Load
is 2-1/2 times the Working Load Limit. Minimum Ultimate strength
is 5 times the Working Load Limit. Crosby Sling Saver hardware meets the requirements
for minimum stock diameter or thickness, and effective contact
width shown in the Recommended Standard Specification for
Synthetic Polyester Roundslings by the Web Sling & Tie
Down Association. WSTDA-RS1 (revised 2001)
Incorporates
same ear spread and pin dimensions as conventional Crosby
Shackles. Allows easy connection to pad eyes, eye bolts,
and lifting lugs.
Web Centers of America, Inc.