McKissick® Overhaul Balls UB500 Series Non Swiveling Overhaul Balls
• Sizes 4 Tons through 15 Tons available with Crosby’s S1316A
“Positive Locking” SHUR-LOC® hook which may be used for lifting
personnel. Meets the intent of OSHA Rule 1926.1431(g)(1)(i)(A) and
1926.1501(g)(4)(iv)(B).
• Design Factor 4:1.
• Each ball can be equipped with the new McKissick® US-422T
Wedge Socket which can be easily adjusted to fit various sizes of
Wireline by changing the wedge (Ensure that correct wedge is used
for selected Wireline size).
• All hooks used on UB500 Overhaul Balls (S320, S320N & S1316A)
are forged from alloy steel. The S320 and S320N hooks come
complete with latches.
• The S320 hook (PL latch) and the S320N hook (S4320 latch), with
the proper latch attached, may be used for personnel lifting when
secured with proper device (Bolt, nut and pin for the PL latch;
Cotter pin for the S4320 latch). Meets the intent of OSHA Rule
1926.1431(g)(1)(i)(A) and 1926.1501(g)(4)(iv)(B).
Key to McKissick® UB500
S320N
Eye Hook
S1316A SHUR-LOC®
Both styles available with optional McKissick® Wedge Socket Assembly or S-421 TERMINATOR™ Wedgs Socket
UWO 422T TERMINATOR™
Wedge Only
• Sizes 4 Tons through 10 Tons available with Crosby’s S1316A “Positive Locking” SHUR-LOC® hook which may be used for lifting personnel. Meets the intent of OSHA
Rule 1926.1431(g)(1)(i)(A) and 1926.1501(g)(4)(iv)(B).
• Design Factor 4:1.
• The top swivel design on the UB500 assures the ball remains stationary if the wire line spins.
• The swivel incorporates a sealed roller thrust bearing together with a grease fitting for easy lubrication.
• Each ball can be equipped with the new McKissick®
US-422T Wedge Socket which can be easily adjusted to fit various sizes of wire rope by changing the wedge (Ensure that correct wedge is used for selected wire rope size).
• All hooks used on UB500 Overhaul Balls (S320, S320N & S1316A) are forged from alloy steel. The S320 and S320N hooks come complete with latches.
• The S320 hook (PL latch) and the S320N hook (S4320 latch), with the proper latch attached, may be used for personnel lifting when secured with proper device (Bolt, nut and pin for the PL latch; Cotter pin for the S4320 latch).
Meets the intent of OSHA Rule 1926.1431(g)(1)(i)(A) and 1926.1501(g)(4) (iv)(B).
