Universal Lifting Clamp/ Straight Eye- IP10/ IP10J

The IP10 vertical lifting clamp is used for lifting. turning, moving or vertical transfer of sheet, plates or fabrications from horizontal to vertical and down to horizontal (180 Degrees)as needed. The hinged hoisting eye allows for the clamp to place and lift the load from any direction, or with a multiple leg sling without side-loading the clamp. CALL 1-800-920-3330 For Available Discount Pricing!

Be the first to review this product

SKU: IP10

IP10 Stock No. *

Available in capacities of .5 thru 30 metric tons (Higher Working Load Limits are available upon request)
Wide variety of jaw openings available: 0" to 6.13".
Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
Individually Proof Tested to 2 times the Working Load Limit with certification.
Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently stamped on body. User manual with test certificate is included with each clamp.

Available in a variety of styles:

IP10- Standard clamp materials with a surface hardness to 363hv10(345 HB)
IP10J- Larger jaw opening.
IP10S- For use in Stainless Steel material
IP10H- For use with materials with a surface hardness to 472HV10 (450HB)

Full 180 degree turning range for material transfer, turning and moving.
Lock open, lock closed ability with latch for pretension on material and then release material.
Optional IP-5000 Stinger assembly available (Page 428 of the Crosby Catalog) Allows for easy connection between the clamp and hoist hook
Minimum replacement kits are available.
Manufactured by an ISO 9001 facility.
All sizes are RFID EQUIPPED.

CALL 1-800-920-3330 For Available Discount Pricing!